-
MADRID - Spigot Stand Off Packer - Face Mount
×
$13.882 × $6.94
MADRID - Spigot Stand Off Packer - Face Mount
×
We have 2 types of hinges you can choose from, either from ourĀ Standard rangeĀ orĀ Deluxe Soft-Close range.Ā Your Hinges will dictate which glass panels you need to purchase.
Standard Hinges
ā Self-Closing Hinges
ā Made from Stainless Steel 316
ā Have a āAnti-Toe Holdā cone cap
ā Part of the āMaster Hingeā brand
ā Weighted capacity of 25kgs per pair
ā Able to suit wide range of applications:
āĀ Glass Hinge PanelĀ toĀ Glass Gate Panel
āĀ Square PostĀ toĀ Glass Gate Panel
āĀ WallĀ toĀ Glass Gate Panel
.
Soft-Close Hinges
Our Soft-Close hinge range are the safest and most reliable specially designed pool fence hinge in the industry that complies with stringent Australian Standards AS1926 and AS2820
āĀ 155 SeriesĀ are compatible with our STD Glass Panels
āĀ 125 SeriesĀ are compatible with our Soft-Close Glass Panels
āĀ EliminatesĀ SlammingĀ Glass Gates
ā Self-Closing pool fence compliant safety hinge
ā Adjustable closing speeds with European dampeners for a Soft-Close action
āĀ 155 SeriesĀ come with a Polymer cone cap supplied for āAnti-Toe Holdā
ā Made from Stainless Steel 2205 (Higher rust & wear resistant than SS316)
ā Weighted capacity of 45kgs per pair
āĀ Able to suit wide range of applications:
āĀ Glass Hinge PanelĀ toĀ Glass Gate Panel
āĀ Square PostĀ toĀ Glass Gate Panel
āĀ WallĀ toĀ Glass Gate Panel
Hinge Gap (A)
ā STD Range = 10mm
ā Soft Close Range = 5mm
Latch Gap (B) Glass to Glass
ā 9mm
Latch Gap (C) Glass toĀ Square Post/Wall
ā STD Range = 22mm
ā Soft CloseĀ Range = 8mm
STD GapĀ (D)
ā 38mm ā 60mm
To be compliant to pool fencing requirements, Raked Panels (also known as Retaining Wall Panels) may be needed.
Our raked panels are higher at one side of the glass which enables step points or changes in height to be overcome. We have 1200mm Wide panels with 5 heights available.
The modular raked panels are aĀ large cost savingsĀ versus custom made raked glass and also enable jobs to be completed immediately.
ā Our raked panels come standard with 1200mm height one end & 1200mm Width
ā The adjusted height options are: 1400, 1500, 1600, 1700, 1800mm
ā Each panel comes with a 400mm straight top on the high end
ā Grade āAā 12mm thick clear toughened glass
ā 5mm radius corners
ā Compliant to AS/NZS2208
ā Examples of raked panel uses:
A) Overcome different levels along fence line
B) Overcome landscaping as a toe hold along fence line
C) Overcome stepping point issues around fence line
*Please take care to refer to relevant standards to ensure our raked panels are suitable for your needs as each installation situation / compliance requirement is unique.
Facemount Spigots
ā Friction facemount spigots
ā Slimline 45mm front profile
ā Duplex Stainless Steel 2205
ā Hidden Facemount Installation
ā 2x M12 fixing nuts included (Rod / Screws sold seperately)
ā Slotted fixing hole allows for easy fixing & adjustment
ā Earthing terminal included
ā Comes in 3 colours: Black, Satin, Polish
Ā
Base Plate Spigots
Double Friction Design:Ā This patented design allows for faster installation and easier alignment of glass panels.
ā Duplex stainless steel 2205
ā Double friction design
ā Slimline 45mm front profile
ā Multiple base plate fixing points
ā Includes 22mm high domical cover
Ā
Tilt Spigots
Innovative face mount spigot featuring tilt adjustment for easy alignment of glass panels
ā Easy tilt adjustment
ā Duplex stainless steel 2205
ā Face-mount spigot, fix to vertical surface of concrete, timber/steel beams
ā 2 Part spigot for easy install:
(1) Rear Plate fixes to vertical surface
(2) Spigot attaches to rear plate with 2x M8 counter sunk screws
ā Timber/beam fixing ā 2x fixing points in the rear plate for increased strength
ā Concrete fixing ā 1x Sturdy M18 fixing point ā Ideal for narrow slabs
ā Earthing terminal included
Ā
Top Mount Spigots (Low Profile)
Single central hidden fixing idea for narrow beams or slab installations
ā Duplex stainless steel 2205 spigot
ā Requires 1x Central M12 fixing and specially machined nut
ā Ideal for narrow/PFC beams and slab installations
ā No large core holes or domical covers required
ā 45mm front slimline profile x 65mm depth
ā Suits 12mm & 17.52mm Glass Panels
ā Friction fit glass installation with friction packer
ā 120mm Depth spigot mouth provides extra clamping strength and rigidityĀ
A contemporary clamp which acts as a brace between glass panels, providing extra rigidity to your fence.
All our clamps are made from Stainless Steel 316 and come in Polish, Satin or Matt Black finish.
Clamps are āFriction Fitā meaning that the glass panels do not require pre-drilled holes for fitting.Ā
Straight Clamps:
ā Suits 12mm Glass Panels
ā SML = Ideal for panels with gaps between 20-50mm
ā LGE = Ideal for panels with gaps between 20-95mm
90 Degree Clamps:
ā Suits 12mm Glass Panels
ā Bracing of glass panels at 90 degrees
Wall Clamp:
ā Suits 12mm Glass Panels
ā Brace glass to wall/posts
ā 2x Countersunk fixing holes to wall/post
Offset Wall Clamp:
ā Suits 12mm Glass Panels
ā Brace glass to walls/posts
ā Rotate for left or right side fixing
ā 1x Countersunk hole for fixing to wall/post
Swivel Clamp:
ā Suits 12mm Glass Panels
ā Multi angle clamp ā a great solution for variable angle installs
Square Face/ Square Back Clamp:
ā Duplex Stainless Steel 2205
ā Suits 8mm, 10mm, 12mm Glass Panels
ā Supports glass panels with SQ Post / Wall
Because we have a range of different spigots and there are a range of different applications and locations youāll be installing your āFrameless Glass Pool Fenceā there are a few different options you can choose from to install your spigots securely.
Cement Slabs / Tiles on concrete slab:
āĀ Base Plate SpigotĀ = 4x M10 x 120mm ā SS316 Threaded RodsĀ (Chem Anchor)
āĀ Face-mount SpigotĀ = 2x M12 x 120mm āĀ SS316Ā fixing Threaded RodĀ (Chem Anchor)
āĀ Deluxe Top-mount SpigotĀ = 1x M12 x 120mm ā SS316 Threaded Rod (Chem Anchor)
āĀ Tilt SpigotĀ = 1x M18 x 120mm ā SS316 Threaded RodĀ (Chem Anchor)
Timber Installations (Part way through Beam/Joist):
āĀ Base Plate SpigotĀ = 4x M10 x 110mm ā SS316 Timber Lag Screws (Must have sufficient anchoring)
āĀ Face-mount SpigotĀ = 2x M12 xĀ (115mm or 160mm) āĀ SS316Ā Lag Screws
āĀ Deluxe Top-mount SpigotĀ =Ā 1x M12 xĀ (115mm or 160mm) āĀ SS316Ā Lag Screws
āĀ Tilt SpigotĀ =Ā 2x M12 x 93mm ā SS316 Lag Screw Kit
Timber Installations (All the way through Beam/Joist):
āĀ Base Plate SpigotĀ = 4x M10 SS316 Threaded Rod (Cut to size onsite) (Must have sufficient anchoring)
āĀ Face-mount SpigotĀ = 2x M12 SS316 Threaded Rod (Cut to size onsite)
āĀ Deluxe Top-mount SpigotĀ = 1x M12 SS316 Threaded Rod (Cut to size onsite)
āĀ Tilt SpigotĀ = 2x M12 SS316 Threaded Rod (Cut to size onsite)
Choose between ourĀ Standard Range (STD)Ā orĀ Soft Close Range (SC).
The range determines which Hinge Panel, Hinges and Gate Panel you need.Ā
For planning your pool fencing project and to calculate how many panels are required, you need to know theĀ gap dimensionsĀ between panels, hinges, doors and walls. We recommend you use our online fence planner.Ā
ā Standard Latch Kits areĀ NOTĀ lockable.Ā
āĀ NOTE:Ā You can purchase the āUPGRADE Lock Kitā if lock option is required
There are 3 types of Spigots to choose from
ā Face Mount Spigots ā Ideal for attaching on front of terrace / balcony
ā Spigot with Base Plate ā Best DIY option. Easy to install
ā Top Fix Spigot ā Slightly more advanced to install. For Minimalistic look or small space
ā 2 spigots per Hinge or Pool glass panel
Clamps are needed to provide additional stability for frameless glass pool fences. Especially hinge panels have to be braced to the next pool panel with an additional clamp.
ā 1 clamp per gap
āĀ HIGHLY RecommendedĀ ordering 2 more packs of fixings and screws as spare
āĀ Read the description of your chosen spigot to determine which screws to use
ā Use Chem Anchor Glue to fix rods in concrete
It is easy toĀ SITE MEASURE,Ā PLAN,Ā ORDERĀ &Ā INSTALLĀ your DIY Fence.
Simply follow our step by step Site Measure Guide below to work out everything you need.
Have Questions?
Feel free to reach out via Messenger, Email or call our fencing experts directly.
Our goal is to provide trade & wholesale pricing to all our customers, and we beat most retail prices by an average of 20-50%.
We also offer a 5% price beat guarantee on all equivalent products up to $250 for retailers such as Bunnings, Mitre10, Stratco etc.
When you shop with FencesSydney.au, you know you get the best deal on your DIY projects.
For all orders we deliver direct to site for your convenience.
Please ensure there is a clear designated set down area on site.Ā
If you have specific delivery instructions and details please ensure you add the details to theĀ Order NotesĀ during checkout.
Collection of Orders from our depot is available. Please allow 24hrs to process your order, pick and pack your products ready for collection. We send you an email with all details once it is ready.Ā
For urgent orders please callĀ us to see how we can help you. However, we cannot guarantee it will be possible every time but will do our best to facilitate urgent orders. Thank you for your understanding.Ā
Orders are typically processed and delivered within 3 ā 5 business days*
Order Confirmations:Ā We provide order confirmations via text as soon as your order is packed and ready for delivery.
*stock permitting, for large orders time-frame may change and if so, we will contact you.
